bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing_replacing Right Front Door Sensor > < 8 RA Removing And Installing_replacing Right B-pillar Sensor
Page 1
background image

65 77 740

Removing and installing (replacing) left front
door sensor

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Warning!

Note airbag safety instructions!

Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks:

Detach sound insulation in work area

Unfasten plug connection (1) and disconnect.

Release screw (2).

Tightening torque 65 77 7AZ

.

Remove sensor with pin (3) from door panel fit (4) towards rear.

Installation:

Make sure fit (3) is correctly seated.

RA  Removing and installing (replacing) left front door sensor

BMW AG - TIS

20.02.2013  10:02

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing_replacing Right Front Door Sensor > < 8 RA Removing And Installing_replacing Right B-pillar Sensor