3 Series E90 330xd (M57T2) SAL
11 12 000
Removing and installing / sealing cylinder
head cover (M57T2)
Necessary preliminary tasks:
•
Remove fan with fan cowl
•
Remove air filter
•
Remove all injectors
Important!
Protect alternator against engine oil.
Cover alternator with suitable apparatus (risk of damage).
Fit charge air hoses dry and without grease.
Release screws (1).
Remove suction pipe in direction of arrow.
Release all bolts (arrows).
Release bolts (1) from outside to inside.
Remove cylinder head cover (3).
Installation:
First tighten bolts (1) from inside to outside.
Tighten down outer bolts diagonally and evenly.
RA Removing and installing / sealing cylinder head cover (M57T2)
BMW AG - TIS
20.02.2013 09:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -