3 Series E90 330xd (M57T2) SAL
24 00 050
Installing replacement transmission
(GA6HP26Z AWD)
Drain automatic transmission fluid at oil drain plug.
Tightening torque: 24 11 6AZ
.
Recycling:
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations
Important!
-
Before installing replacement transmission, always flush
transmission fluid cooler together with lines.
-
After completion of work, check transmission fluid level.
Replacement transmission is supplied filled with
transmission fluid.
Use only the approved transmission fluid.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Remove transfer box
•
Remove automatic transmission
RA Installing replacement transmission (GA6HP26Z AWD)
BMW AG - TIS
20.02.2013 11:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -