3 Series E90 330xd (M57T2) SAL
31 50 001
Removing and installing/replacing front
differential
Warning!
Danger to life!
Secure engine in installation position to prevent it from falling
down.
Necessary preliminary tasks:
•
Secure engine in installation position
•
Drain and dispose of front differential oil
•
Remove left output shaft
•
Press right output shaft approx. 6 to 7 cm out of front
differential
•
Remove front propeller shaft
•
Replacement only:
-
Replace front axle output flange on transfer box
Note: Replace the output flange to ensure a clean seal
on the transfer case.
•
Lower front axle support
Important!
Grip front differential firmly while releasing last bolt in order to
avoid damage caused by the differential falling.
RA Removing and installing/replacing front differential
BMW AG - TIS
20.02.2013 12:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
