3 Series E90 330xd (M57T2) SAL
Version with automatic transmission: If necessary, disconnect
hydraulic lines from oil sump.
Release screws (1).
Tightening torque 31 50 1AZ
.
Detach front differential from oil sump and remove towards rear.
Installation:
Replace O-ring if necessary.
Coat O-ring with front differential oil.
After installation:
•
fill with front differential oil
•
Check transfer case oil level, correct if necessary
•
Carry out steering angle sensor adjustment
RA Removing and installing/replacing front differential
BMW AG - TIS
20.02.2013 12:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
