3 Series E90 330xd (M57T2) SAL
31 00 ...
Front axle + steering (AWD): wheel/chassis alignment check must be carried out after the
following work
A wheel/chassis alignment check must be carried out after the following work:
•
Release of following screw/bolt connections:
•
Steering gear to front axle carrier
•
Control arm to front axle carrier
•
Compression strut to front axle carrier
•
Support bearing to body (if centering pin is missing)
•
Tie rod end to tie rod
•
Replacement of following parts:
1.
Front axle carrier
2.
Steering gear
3.
Gaiter (if the tie rod end has to be screwed off)
4.
Control arm
5.
Support bearing (if centering pin is missing)
6.
Swivel bearing
7.
Compression strut or compression strut rubber mount
RA Front axle + steering (AWD): wheel/chassis alignment check must be carried out a
BMW AG - TIS
20.02.2013 12:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
