3 Series E90 330xd (M57T2) SAL
32 41 060
Removing and installing/replacing vane pump
for power steering (M47T2, M57T2)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove belt pulley
Note:
The following illustrations have been drawn up using the E90 with
M47T2 as an example. Other vehicles and engines may show
differences in detail.
RA Removing and installing/replacing vane pump for power steering (M47T2, M57T2)
BMW AG - TIS
20.02.2013 13:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
