Removing and Installing Radiator Seal - BMW 3 Series E90 330xd (M57T2) SAL Repair Instructions
51 71 ...
Removing and installing/replacing radiator
seal
Warning!
Scalding hazard!
Only perform work after engine has cooled down.
Important!
Observe safety instructions for raising the vehicle
Necessary preliminary tasks:
•
Remove front underbody protection
Note:
Prior to removing, pay attention to the exact installation position
with respect to the adjoining components.
Release screws (1).
If necessary, remove underbody protection bracket.
Release catches (2) and feed out radiator seal (3) towards rear.
RA Removing and installing/replacing radiator seal
BMW AG - TIS
20.02.2013 19:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
