3 Series E90 330xd (M57T2) SAL
Lever cover with trim wires (1) out of metal claws (2) all round
from ski bag opening.
Remove backrest cover with padding from carrier section.
Detaching cover and padding:
•
Release all retainers in marked area
•
Remove cover from padding
•
Remove remaining retainers from cover and padding
Installation:
Insert new retainers with special tool 52 0 050 .
In so doing, enclose wire in padding and trim wire of cover.
Only when replacing seat cover for E90 with build date up to
03/06:
Pull liner off foam strip (1).
Stick on foam strip flush with top edge of padding.
Short protruding foam strip.
Replacing cover:
•
Remove all trim wires from cover
•
If necessary, cut pockets in new cover for trim wires
•
Push trim wires into cover pockets
RA Replacing left backrest cover for rear seat
BMW AG - TIS
20.02.2013 20:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
