3 Series E90 330xi (N53) SAL
Important!
Do not distort connecting rods or crankshaft.
Use the old connecting rod bolts to check connecting rod
clearance.
Tighten down connecting rod bolts with special tool 00 9 120 .
Tightening torque 11 24 1AZ
.
Remove bearing cap. Read off bearing clearance at width of
crushed plastic thread with aid of measuring scale.
connecting rod bearing clearance.
•
Remove plastic thread.
•
Coat crankshaft and bearing shells with oil.
•
Install new connecting rod bolts and tighten down with special
tool 00 9 120 .
Tightening torque 11 24 1AZ
.
Assemble engine.
RA Replace all big-end bearings (N53)
BMW AG - TIS
20.02.2013 20:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -