3 Series E90 330xi (N53) SAL
•
Seal all fuel system openings with protective caps or
plugs.
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Necessary preliminary tasks:
•
Remove pressure lines
•
N54 only: Remove intake filter housing
Recycling:
Fuel escapes when fuel lines are detached.
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Unlock plug (1) and remove.
Pull connector holder off high-pressure rail.
Remove all holders for wiring harness from high-pressure rail.
RA Removing and installing/replacing high-pressure rail (N54, N53)
BMW AG - TIS
20.02.2013 21:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
