3 Series E90 330xi (N53) SAL
Release screws.
Installation:
Observe screw fastening sequence without fail.
Tightening torque, steel screws 24 00 1AZ
.
Aluminium screws/bolts must be replaced.
Tightening torque and angle of rotation, aluminium screws/bolts
24 00 2AZ
.
Installation:
Tighten down screws/bolts to specified torque.
Secure special angle of rotation tool 00 9 120 with magnet
00 9 130
to underbody and screw down blue aluminium screws/bolts in
accordance with angle of rotation.
Angle of rotation 24 00 2AZ
.
Installation:
Bore hole (1) of drive plate must be accessible from opening on
engine oil sump. Check dowel sleeves (2...3) for correct seating.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disc.
Flange automatic transmission to engine.
RA Removing and installing automatic transmission (6HP19Z) N52/N53 AWD
BMW AG - TIS
20.02.2013 23:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
