3 Series E90 330xi (N53) SAL
24 13 013
Replacing output flange shaft seal
(GA6HP19Z) AWD
Special tools required:
•
23 0 490
•
24 4 310
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Remove transfer box
Drive a hole into radial shaft seal (1) using a centre punch.
Important!
Do not use a drill as drillings may result in transmission
malfunction.
Screw special tool 23 0 490 into radial shaft seal (1).
Drive out radial shaft seal (1) with impact weight (2).
RA Replacing output flange shaft seal (GA6HP19Z) AWD
BMW AG - TIS
20.02.2013 23:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
