3 Series E90 330xi (N53) SAL
31 12 026
Removing and installing/replacing guide joint
in swivel bearing (AWD)
Special tools required:
•
31 2 240
•
31 2 242
•
31 2 246
•
33 4 200
•
33 4 205
Necessary preliminary tasks:
•
Remove front wheel
Slacken nut (1), grip with Allen key if necessary.
Installation:
Replace self-locking nut.
Tightening torque 31 12 6AZ
.
Unfasten screws (2).
Remove guide joint with compression strut from opening in swivel
bearing.
Installation:
Recondition thread in swivel bearing.
Keep guide joint and opening in swivel bearing clean and free
from oil and grease.
Replace micro-encapsulated screws.
Tightening torque 31 12 7AZ
.
RA Removing and installing/replacing guide joint in swivel bearing (AWD)
BMW AG - TIS
21.02.2013 00:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
