3 Series E90 330xi (N53) SAL
Important!
Cut outer metal sheet only.
Measurement a = approx. 140 mm from roof edge.
Open weld joints in areas (2).
Installation:
Weld in reinforcement plate at severance cut.
Apply window glass adhesive to cavity acoustic baffles (3).
Mark severance cut (1) in accordance with measurement and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 30 mm from lock striker reinforcement.
Open weld joints in areas (2).
Installation:
Apply window glass adhesive to cavity acoustic baffle (3).
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
21.02.2013 04:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
