3 Series E90 330xi (N53) SAL
65 50 011
Removing and installing (replacing) video
module for on-board monitor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Disconnect battery negative lead.
•
Remove luggage compartment trim on left.
Note:
Follow instructions for handling optical fibres.
Unfasten screws (2) and nuts (3).
Pull back video module for on-board monitor (1) and disconnect
plug connections.
Remove video module for on-board monitor (1) complete with
holder.
RA Removing and installing (replacing) video module for on-board monitor
BMW AG - TIS
21.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
