3 Series E90 335d (M57T2) SAL
11 25 530
Removing and installing/replacing all pistons
(M57T2)
Special tools required:
•
00 2 530
•
00 9 120
•
11 4 492
•
11 6 111
•
11 6 112
•
11 6 113
•
11 6 330
•
11 8 140
Necessary preliminary tasks:
•
Remove engine.
•
Remove cylinder head.
•
Remove oil pan
•
Remove oil pump.
Important!
Re-install piston, connecting rod and bearing shells back in
the same position and in the same installation location.
Connecting rods and bearing covers are designated with the
same pair number: do not mix them.
Replace connecting rod bolts.
RA Removing and installing/replacing all pistons (M57T2)
BMW AG - TIS
21.02.2013 06:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
