3 Series E90 335d (M57T2) SAL
Remove bearing caps of inlet camshaft and lift out inlet
camshaft (1).
All bearing caps are marked.
E= inlet camshaft.
A = exhaust camshaft.
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
Important!
These screws must "not" be removed.
Note:
E
Inlet camshaft
A
Exhaust camshaft
RA Removing and installing / replacing inlet camshaft (M57T2)
BMW AG - TIS
21.02.2013 07:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -