3 Series E90 335d (M57T2) SAL
11 65 075
Removing and installing/replacing vacuum
control unit for turbine control flap (M57T2
TOP)
Special tools required:
•
11 6 050
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Important!
If the turbocharger or the vacuum control unit is released, it
will be necessary to adjust the vacuum control unit.
Overpressure and vacuum lines are identified by the size of
the seals and colour-coded Red and Blue and must not be
mixed up with each other.
Build up pressure with Blue colour.
Generate vacuum pressure with Red colour.
RA Removing and installing/replacing vacuum control unit for turbine control flap (
BMW AG - TIS
21.02.2013 07:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -