3 Series E90 335d (M57T2) SAL
Open cap (1) on coolant expansion tank (2).
Installation:
Close cap (1) until the arrow marks line up.
If fitted, slacken drain plug (1) on coolant radiator. On coolant
radiators which do not have a drain plug, remove coolant hose.
Important!
Risk of damage!
Cover opening on turbocharger without fail.
Open drain plug (1) on engine block.
Installation:
Replace seal.
Tightening torque 11 11 5AZ
.
Open vent screw (1).
RA Draining and adding coolant (M57T2)
BMW AG - TIS
21.02.2013 09:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -