3 Series E90 335d (M57T2) SAL
Tightening torque 32 41 9AZ
(pressure line).
Tightening torque 32 41 10AZ
(return line).
Release nuts and remove screws (1) towards bottom.
Remove power steering gear (2) towards front.
Installation:
Replace screws and nuts.
Tightening torque 32 00 1AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment
RA Removing and installing/replacing power steering gear
BMW AG - TIS
21.02.2013 10:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
