bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Replacing Two Rubber Mounts (front) For Rear Axle Carrier > < 11 RA Removing And Installing_replacing Left Or Right Underbody Cover
Page 1
background image

33 33 001

Replacing left or right rear axle carrier
compression strut

Important!

Observe safety instructions for raising the vehicle

Driving without compression struts is not permitted!

 

Risk of damage!

The rear axle carrier must be supported at the front is both
compression struts have to be replaced!

Necessary preliminary tasks:

Remove underbody cover

Release screws (1).

Installation:

Replace screws.

Tightening torque 33 33 2AZ

.

 

Release screw (3) and remove compression strut (2).

Installation:

Check threads for damage; if necessary, repair with Helicoil thread
inserts.

Tightening torque 33 33 1AZ

.

RA  Replacing left or right rear axle carrier compression strut

BMW AG - TIS

21.02.2013  11:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Replacing Two Rubber Mounts (front) For Rear Axle Carrier > < 11 RA Removing And Installing_replacing Left Or Right Underbody Cover