3 Series E90 335d (M57T2) SAL
Release screw (1).
Tightening torque 64 52 3AZ
.
Important!
To prevent refrigerant from escaping, seal all the openings on
the compressor before feeding the compressor (3) out.
Disconnect plug connection (1).
Secure compressor (3) against falling out.
Release bolt (2) and remove compressor () towards front.
Installation:
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 52 3AZ
.
After installation:
•
Evacuate and fill A/C system
RA Replacing A/C system compressor (M57T2 335d)
BMW AG - TIS
21.02.2013 21:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
