3 Series E90 335i (N54) SAL
11 12 719
Resurfacing cylinder head sealing face (N54)
Important!
Reconditioning on cylinder head max. 0.3 mm
Necessary preliminary tasks:
•
Remove cylinder head.
•
Remove exhaust camshaft.
•
Remove inlet camshaft.
•
Remove roller cam followers.
•
Remove all HVCA elements.
•
Remove all valves.
Check evenness of cylinder head sealing faces with a standard
straight-edge (1).
Note:
Max. deviation from level (longitudinal) 0.10 mm
Check evenness of cylinder head sealing faces with a standard
straight-edge (1).
Note:
Max. deviation from level (transversal) 0.05 mm
RA Resurfacing cylinder head sealing face (N54)
BMW AG - TIS
22.02.2013 03:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
