3 Series E90 335i (N54) SAL
Secure crankshaft and camshaft.
Do not remove special tools 11 0 300 and 11 4 280 .
Fit special tool 11 9 280 .
Release central bolt (1).
Note:
A 3/4 inch tool is needed to release the central bolt.
A second person is required.
Remove hub (2) towards front.
Installation:
Replace radial seal at front.
Open screw plug on bedplate.
Installation:
Replace seal.
Release screw (1) with special tool 11 8 640 on triangular
drive.
Tightening torque: 11 41 3AZ
.
Installation:
Replace aluminium screws.
Remove triangular drive (1) in direction of arrow.
RA Removing and installing/replacing chain module for oil pump/vacuum pump (N54)
BMW AG - TIS
22.02.2013 03:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
