3 Series E90 335i (N54) SAL
12 31 ...
Replacing alternator belt pulley
Special tools required:
•
12 7 121
•
12 7 122
Illustrations show N42:
If fitted, remove cover cap from belt pulley.
Depending on alternator type, slacken screw with:
-
Torx socket wrench
-
Slacken multi-tooth socket wrench (special tool 12 7 122 ).
Grip freewheel with special tool 12 7 121 .
Installation:
Tightening torque 12 31 8AZ
.
Remove alternator drive belt.
Release screw and if necessary remove freewheel.
RA Replacing alternator belt pulley
BMW AG - TIS
22.02.2013 03:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
