3 Series E90 335i (N54) SAL
Unfasten nut.
Installation:
Replace self-locking nut.
Tightening torque, 16 11 1AZ
.
Release screws for tightening straps on left and right and remove
tightening straps.
Installation:
Tightening torque 16 11 2AZ
.
Important!
Carefully feed the vent line through the body when lowering
the fuel tank.
Installation:
Note rubber mount with spacer bush.
Wide collar on spacer bush points to screw head.
The following components must be modified when the fuel tank is
replaced:
-
Right sensor unit (2)
-
Left sensor unit (3)
RA Removing and installing/replacing fuel tank (petrol/gasoline vehicles with US ve
BMW AG - TIS
22.02.2013 04:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -