3 Series E90 335i (N54) SAL
Release aluminium bolt (1) on right next to cable retaining plate.
Blue aluminium screws/bolts must be replaced.
Tightening torque 24 00 2AZ
.
Grip clamping sleeve (1).
Slacken nut (2).
Detach retainer (3) downwards using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever.
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 24 71 1AZ/2AZ
.
RA Removing and installing automatic transmission (GA6HP19Z) N54
BMW AG - TIS
22.02.2013 05:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -