3 Series E90 335i (N54) SAL
Release nuts and remove screws (1) towards bottom.
Move steering gear forwards and tie up.
Installation:
Replace screws and nuts.
Tightening torque 32 00 1AZ
.
Disconnect plug connections (1) and remove steering gear.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
•
Perform chassis alignment check
•
Carry out adjustment for active front steering
RA Removing and installing/replacing active front steering power steering gear
BMW AG - TIS
22.02.2013 06:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -