3 Series E90 335i (N54) SAL
33 21 ...
Pressing output shaft out of drive flange and
drawing in (output shaft removed from rear
differential)
Special tools required:
•
33 2 111
•
33 2 115
•
33 2 116
•
33 2 117
•
33 2 118
•
33 2 119
•
33 2 160
•
33 2 201
•
33 2 202
•
33 2 203
•
33 2 205
•
33 2 206
•
33 2 207
•
33 5 070
Warning!
Risk of injury!
It is not permitted to use the impact screwdriver to press out
and draw in the output shaft.
Important!
Risk of damage!
To avoid damaging the output shaft and adjoining parts, it is
essential during the pressing-out process to repeatedly check
and if necessary correct the position of the output shaft.
Important!
To avoid damaging the dust sleeve, use special tool
33 2 160 to press out and draw in the output shaft after
removing the brake disk.
Note:
Rounded inside edge of special tool 33 2 160 must point to drive
flange.
RA Pressing output shaft out of drive flange and drawing in (output shaft removed f
BMW AG - TIS
22.02.2013 07:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -