Replacing Seal for Glass Slide-tilt Sunroof Lid - Step-by-Step Guide
54 12 117
Replacing seal for glass slide/tilt sunroof lid
Necessary preliminary tasks:
•
Remove glass slide/tilt sunroof lid
Detach seal (1) from glass slide/tilt sunroof lid (2).
Installation:
Coat guide channel (1) and seal (2) with soapy water.
Begin installation at rear middle, with sealing joint (3).
Do not pull seal too tightly in radii (leakage).
RA Replacing seal for glass slide/tilt sunroof lid
BMW AG - TIS
22.02.2013 13:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -