3 Series E90 335xi (N54) SAL
Shims (1) of cylinder head bolts can only be removed with a
magnet (2) between cylinder head and bearing strip.
Secure special tool 11 0 320 with existing cylinder head cover
bolts (1).
Tightening torque 11 12 4AZ
.
Important!
Removing and install cylinder head with a second person
helping.
Weight of cylinder head with add-on parts is approx. 40 kg.
Do not set cylinder head down on sealing face, risk of
damage to valves.
Important!
Set down cylinder head with inlet and exhaust camshafts on
side only, risk of damage to valves (1).
Insert special tool 11 4 430 into bores.
RA Removing and installing cylinder head (N54)
BMW AG - TIS
22.02.2013 09:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
