3 Series E90 335xi (N54) SAL
11 23 010
Removing and installing or replacing
vibration damper (N54)
Necessary preliminary tasks:
•
Detach front underbody protection.
•
Remove drive belt.
Release screws (1).
Tightening torque: 11 23 1AZ
.
Remove vibration damper (2).
Assemble engine.
RA Removing and installing or replacing vibration damper (N54)
BMW AG - TIS
22.02.2013 09:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
