3 Series E90 335xi (N54) SAL
Warning!
Protective goggles must be worn.
Slide special tool 11 8 563 up to piston pin circlip (2)
Special tools 11 8 562 and 11 8 563 are prepared.
Warning!
Protective goggles must be worn.
Cutout on special tool 11 8 562 must point to piston crown; only
then can special tool 11 8 563 be correctly fitted.
When special tools 11 8 562 and 11 8 563 are correctly
positioned, the piston pin circlip must be driven in with a plastic
hammer in the direction of the arrow.
Note:
See illustration.
Piston pin circlip is correctly installed when opening (1) points
downwards.
Note:
B 30.
Install all piston rings.
Install all bearing shells.
Coat piston and piston rings with oil.
Pre-install piston (2) in special tool 11 8 141 .
Screw on special tool 11 8 590 in connecting rod (2).
Installation:
Check protective lugs (1) on special tool 11 8 590 for correct
position and damage.
RA Removing and installing/replacing all pistons (N54)
BMW AG - TIS
22.02.2013 09:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
