3 Series E90 335xi (N54) SAL
Initially tighten screw of special tool 11 8 553 to ground surfaces
of lower bearing bank (2) and upper bearing bank (1).
Important!
Tighten screws on thrust piece to 2 Nm.
Important!
Set special tool
11 4 350
to 2 Nm.
Pretension all special tools 11 8 553 with special tool
11 4 350 only.
Mount special tools 11 8 553 with screw (1) to inside of cylinder
head.
On cylinder No. 2 mount special tool 11 8 553 with screw (1)
facing outwards.
Position special tools 11 4 350 so that screw connections (2)
of bearing bank are easily accessible.
Tighten lower and upper bearing banks with special tool
00 9 120 .
Position special tool 11 8 553 over screw connection of bearing
banks.
Tightening torque: 11 31 1AZ
.
Important!
Remove special tool 11 8 553 only when camshaft screw
connection is completed.
RA Removing and installing or replacing exhaust camshaft (N54)
BMW AG - TIS
22.02.2013 09:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
