bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Feed Line (N54, N53)|Page 541 > < 3 RA Removing And Installing Or Replacing A High-pressure Line (N54, N53)|Page 539
Page 1
background image

13 53 332

Removing and installing/replacing feed line
(N54, N53)

Special tools required:

13 5 020

13 5 281

13 5 282

32 1 270

Warning!

Disconnect battery negative terminal (risk of fire due to short-
circuiting on removal).

Electric fuel pump starts up automatically each time door is
opened!

Carry out installation work on fuel system only with coolant
temperature below 40 

°

C.

Wear protective goggles.

Important!

Adhere to conditions of absolute cleanliness when working on
the high-pressure fuel system.

Introduced contaminants can cause malfunctions in the
system!

Do not allow any dirt particles or foreign bodies to get
into the system.

Remove all traces of dirt before removing pipes or
individual components.

Use only fluff-free cloths.

RA  Removing and installing/replacing feed line (N54, N53)

BMW AG - TIS

22.02.2013  10:49

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Feed Line (N54, N53)|Page 541 > < 3 RA Removing And Installing Or Replacing A High-pressure Line (N54, N53)|Page 539