3 Series E90 335xi (N54) SAL
16 11 030
Removing and installing/replacing fuel tank
(petrol/gasoline vehicles with US version
DMTL)
Important!
After installation of fuel tank/prior to first engine start-up:
•
Check ground connection at fuel filler neck to body for
continuity. If necessary, clean contact surface between
body and fuel filler pipe screw connection.
•
Fill fuel tank with min. 5 l fuel.
Necessary preliminary tasks:
•
Draw off fuel from fuel tank
•
Remove guide tube for handbrake cables
•
Remove left and right ram-air lips
•
Remove rear seat bench
•
Remove left and right underbody cover
•
Partially detach underbody panelling
Release screws (1) and remove cover (2) from left and right
sides of fuel tank.
RA Removing and installing/replacing fuel tank (petrol/gasoline vehicles with US ve
BMW AG - TIS
22.02.2013 11:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
