3 Series E90 335xi (N54) SAL
Release screws.
Tightening torque 23 00 2AZ
.
Remove holder (1).
Unfasten clip. In so doing, secure catalytic converter (1) against
falling out.
Remove catalytic converter (1).
Installation:
Clean sealing face and replace seal.
Tightening torque 18 00 3AZ
.
Installation:
Secure catalytic converter in installation position with special
tool 18 0 110.
RA Removing and installing/replacing catalytic exhaust-gas converter for cylinders
BMW AG - TIS
22.02.2013 11:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
