3 Series E90 335xi (N54) SAL
Note:
Cutting line for exhaust pipe (1) is designated by a notch in the
pipe.
Cut exhaust pipe with special tool 00 2 210 at marked point
and deburr.
Release nuts for left exhaust pipe.
Installation:
•
Replace self-locking nuts.
•
Replace seal.
•
Tightening torque 18 00 1AZ
.
Release screw.
Tightening torque 18 20 1AZ
.
Remove bracket (1) and then exhaust pipe.
RA Removing and installing/replacing exhaust pipe with catalytic converter for cyli
BMW AG - TIS
22.02.2013 11:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
