3 Series E90 335xi (N54) SAL: Clutch Replacement Instructions
Set clutch down on a clean surface.
Insert special tool 21 2 180 in clutch (1).
Note:
Locking hooks (1) of special tool 21 2 180 must engage in
openings in clutch.
Fit special tool 21 2 170 and tighten down at knurled screw (1).
Note:
Insert special tool 21 2 170 only in area of bores for dowel pins.
Screw in spindle (1) until adjustment ring of clutch (2) can be
turned with special tool 21 2 180 at handles (3).
Press special tool 21 2 180 together at handles (3) as far as it
will go and grip firmly.
At same time tighten down knurled screws (2).
Adjustment ring of clutch is now secured in new position.
Screw in spindle (1) until diaphragm spring is tensioned on stop.
RA Removing and installing/replacing clutch (SAC 240)
BMW AG - TIS
22.02.2013 12:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
