3 Series E90 335xi (N54) SAL
Important!
Cut outer plate only for following severance cuts.
Measurement a = approx. 130 mm from edge of rectangular hole.
Measurement b = approx. 160 mm from centrepoint of 12 mm dia. bore.
Open weld joints in areas (1).
Installation:
Weld in reinforcing panels at all severance cuts.
Apply window glass adhesive to cavity acoustic baffles (2).
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer plate only for following severance cuts.
Measurement a = approx. 210 mm from roof edge.
Measurement b = approx. 80 mm below severance cut a.
Measurement c = approx. 215 mm before hole dia. 20 mm.
Open weld joints in areas (1).
Open adhesive bond in area (3).
Installation:
Sheet panel (2) is needed again to seal cowl.
Plug weld in area (3).
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
22.02.2013 17:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -