3 Series E90 335xi (N54) SAL
Installation:
Make sure retainer (2) is correctly seated on right footwell heating
duct (1).
Insert right footwell heating duct (1) with adapter (3) in right rear
compartment heating duct (4).
Attach right footwell heating duct (1) in area (4) to heater/air
conditioner. Make sure assembly is locked exactly at point (5).
Unfasten plug connection (1) and disconnect.
Release screws (2).
Detach servodrive for blending flap (3) in direction of arrow from
heater/air conditioner (4).
Installation:
Place servodrive for blending flap (3) over guide pin (5).
RA Removing and installing/replacing servodrive for blending flap (right, automatic
BMW AG - TIS
23.02.2013 00:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -