3 Series E90 335xi (N54) SAL
72 11 098
Removing and installing/replacing all rear
lower belt fittings
Warning!
Read and comply with safety regulations for handling airbag
modules and pyrotechnical belt tensioners.
Necessary preliminary tasks:
•
Remove rear seat
Illustration show removal of the left lower belt fitting; proceed in
the same way for the right fitting.
Release screw (1).
Tightening torque 72 11 23AZ
.
Remove lower belt fitting (2).
Installation:
Pin (3) determines the installation position and prevents the lower
belt fitting (2) from turning.
Note:
Middle lower belt fitting (4) can only be removed in conjunction
with right lower belt fitting.
RA Removing and installing/replacing all rear lower belt fittings
BMW AG - TIS
23.02.2013 02:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -