3 Series E90 M3 (S65) SAL
Release screws (2).
Remove vibration damper (1).
Tightening torque: 11 23 1AZ
.
Note:
Engine or transmission installed.
Attach special tool 11 0 280 to vibration damper.
Support special tool 11 0 280 on holder (1).
Release all anti-fatigue bolts (2).
Installation:
Replace stress bolts.
Support special tool 11 0 280 on holder (2).
Tighten anti-fatigue bolts (1) with special tool 00 9 120 .
Tightening torque: 11 23 1AZ
.
Assemble engine.
RA Removing and installing/replacing vibration damper (S65)
BMW AG - TIS
22.02.2013 10:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
