3 Series E90 M3 (S65) SAL
11 31 034
Removing and installing/replacing right inlet
camshaft (S65)
Necessary preliminary tasks:
•
Remove right cylinder head cover.
•
Remove right VANOS exhaust gear
•
Remove right VANOS inlet gear
Release screws (1).
Tightening torque: 11 12 2AZ
.
E
Intake camshaft
A
Exhaust camshaft.
Important!
Risk of mix-up with cylinder bank 5-8.
Arrow must point in direction of travel to chain drive.
Installation:
Lubricate all bearing points with engine oil.
Note:
Illustration shows cylinders 5-8.
Release screws (1) from outside inwards in 1/2 turns.
Tightening torque: 11 12 2AZ
.
Installation:
Lubricate all bearing points with engine oil.
RA Removing and installing/replacing right inlet camshaft (S65)
BMW AG - TIS
22.02.2013 10:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
