3 Series E90 M3 (S65) SAL
Cylinders 1 to 4:
Always start screwing on the inlet side.
Secure central bolt (1) with special tool 00 9 120 .
Important!
Central bolt final tightening.
1.
Joining 20 Nm
2.
Settling torque 80 Nm
3.
Torsion angle 200
°
Secure central bolt (1) with special tool 00 9 120 .
Important!
Central bolt final tightening.
1.
Joining 20 Nm
2.
Settling torque 80 Nm
3.
Torsion angle 200
°
Important!
Remove all special tools.
Position of inlet camshaft, cylinders 5-8.
Designation (E2) on dihedron points upwards.
Installation:
If necessary, crank at crankshaft central bolt.
Position of exhaust camshaft, cylinders 5-8.
Designation (A2) on dihedron points upwards.
RA Adjusting camshaft timing (S65)
BMW AG - TIS
22.02.2013 10:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -