3 Series E90 M3 (S65) SAL
11 51 000
Removing and installing/replacing water
pump (S65)
Necessary preliminary tasks:
•
Remove fan cowl with electronic fan.
•
Remove radiator.
•
Remove A/C compressor drive belt.
•
Remove upper idler pulley for A/C compressor.
Release screw (1).
Remove alternator drive belt.
Remove belt pulley (2).
Release screws (1).
To facilitate removal of the coolant pump, it is possible to insert
M6 screws on left and right (see arrows).
Installation:
Replace all sealing rings.
Assemble engine.
Vent cooling system and check for leaks.
RA Removing and installing/replacing water pump (S65)
BMW AG - TIS
22.02.2013 10:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
