3 Series E90 M3 (S65) SAL
13 41 550
Replacing idle actuator (S65)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit
•
Check stored fault messages
•
Switch off ignition
•
Remove intake air manifold
•
Partially disconnect engine wiring harness, raise cable duct.
•
Remove tank venting valve
Release air intake hose (1).
Release idle air hose (2).
Replace clamps.
Unlock plug connection and disconnect.
Carefully lever idle actuator out of holder.
Assemble engine.
Note:
Now clear the fault memory.
RA Replacing idle actuator (S65)
BMW AG - TIS
22.02.2013 11:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -