3 Series E90 M3 (S65) SAL
Disconnect plug connection (1).
Note:
Pressure line of clutch slave cylinder remains connected.
Important!
Relieve tension on clutch slave cylinder slowly; otherwise air
will be drawn in through sealing sleeve.
Unscrew nuts.
Remove clutch slave cylinder.
Tightening torque 21 52 5AZ.
Supporting transmission:
Support transmission with special tools 23 4 050 , 23 0 132
and 00 2 030 .
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
Remove transmission cross-member.
RA Removing and installing transmission (GS6-53BZ)
BMW AG - TIS
22.02.2013 12:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
