3 Series E90 M3 (S65) SAL
11 36 Variable Camshaft Control
Type
Thread
Tightening specification
Measure
1AZ VANOS to inlet and exhaust
camshafts Observe repair instruction.
S65
M12x1
Attention! Left-hand
thread.
Replace screws
Screws oiled at threads
and heads
1. Jointing torque
20 Nm
2. Setting torque
80 Nm
3. Angle of rotation
200
°
Important 4. Release
screws.
5. Jointing torque 10
°
before TDC.
10 Nm
6. Jointing torque TDC.
20 Nm
7. Setting torque
80 Nm
8. Angle of rotation
200
°
2AZ Non-return valve
S65
M14 x 1.5
15 Nm
AZD Variable Camshaft Control
BMW AG - TIS
23.02.2013 04:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
